October 20, 2008

Dual Core Computer Processors: Luxury or Necessity?

Filed under: Hardware Infos — admin @ 11:38 pm

Most of the talk going on in the computer processor industry is revolving around dual core processors. But what advantages do they actually give and is it worth it in terms of price?

All processors have a core. A processor contains some memory, often referred to as cache, either L1, L2 or L3, depending on how close it is to the core, and the core itself, as well as a few other essentials. The core is the “brain” part, it performs all the big calculations that are needed for the various things a computer does.

Computer cores have been increasing in speed, and increasingly quickly. Manufacturers were in a race to have the chip with the fastest speed, measured in GHz. One surprise is that despite these increases in clock speed, the actual speed of programs didn’t increase proportionately.

As modern programs make much heavier use of other computer parts like memory, and there are often many running at the same time, another approach was needed.

Dual core processors were the answer.

By putting two “brain” parts into the processor, you can run two programs on two cores, without having to share it between them. The effect of this is that when running two or more programs, the processor can now handle much more as a whole.

The part about them that might disappoint is gaming.

Unlike the multitasking environment that is usual for a computer either at home or at the office, games rely on the brute force of a powerful processor to help them along. So far there is no technology to take advantage of the two processors, like the ability to split its tasks over two cores. Most gaming has not improved with this new technology.

As with processors in the past the mainstream of dual core processors is dominated by the two big guys, Intel and AMD.

Intel offers two processors in its range, same processor, just different speeds. The lower priced of the Pentium D processors comes in at around $250. This price is reasonable considering how much you would pay for the top of the line single core processor.

The Pentium D is based on the same core as it’s single core counterparts, just two of them inside. Its boost in performance is quite notable, and makes it presence felt in the multitasking environment.

The AMD Athlon X2 is AMD’s offering in the dual core market. Unlike the Pentium D its lowest priced model comes in at a staggering $400. It’s not expensive compared to processors like its FX series, which are over $1000, but in comparison to Intel it’s expensive.

It too is based on the same core as its single core cousins and also offers the same performance increases.

The price of the AMD is surprising. From a company that became renowned for it’s low cost, high performance processors this is quite a blow. Even the upper model of the Pentium Ds comes in at less that AMD’s cheapest model.

The price might be justified if the AMD actually gave a significant performance boost, but it doesn’t.

For the first time in a long time, I think I would be willing to switch back to an Intel processor. Although my preference is not for dual core, if I had or needed to switch I would certainly go straight for the Pentium D.

And finally, how do they compare to their now out of date traditional processors?

Considering how powerful processors have become I would still not make the switch. Dual core has not been around long enough to produce low cost, slightly out of date models. The power of the AMD Athlon 64 3000+ more than does it for my computing needs, and that’s where I would stay for now.

So for those who are looking for the next cool thing for their desktop computer and price is not a huge issue, this would be your best choice, but go for the lower end Pentium D.

Peter Stewart is a computer enthusiast, his interest in computers and focus on practicle down to earth advice inspired his two websites. http://www.computer-buying-guide.com - Practical buying tips http://www.computer-reviews.net - Fair and honest reviews and opinions

Hard Drive Cooling for 10 Cents

Filed under: Hardware Infos — admin @ 11:13 pm

I have purchased almost every hard drive cooling device on the market, some costing as much as $50 or more. I have systems that place fans in front of the drive that suck air from the outside, and fans that mount underneath. The problem with these setups are that they tend to be expensive, the airflow tends to be quite low, and in general they just don’t cool down the drives by more than 1 - 5 degrees. I even own one that claims an 80cfm airflow. But alas I was never satisfied with any of these cooling methods.

For over a year now I have been able to achieve a 10 - 15 degree Celsius temperature drop on my hard drives simply by using a 10 cent bracket from a local hardware store.

Image: http://cheapbooks.name/pics/DSC00823.JPG

- 1/2″ bracket
- 80mm fan
- 3.5″ hard drive

I use 3 hard drives in every one of my 20 servers, 2 running as a RAID-1 and the third as a spare in case the raid goes down. I use a mounted cooling fan blowing directly onto the circuit board of every drive, using an 80mm fan, with the air blowing in the direction of the drive surface. Any speed fan will have a dramatic affect on cooling. Please note that in some cases I suspected that the drive temperature was not being reported properly, as some drives showed no change in temperature via software but were clearly cooler to the touch.

Simply mount a standard 1/2″ bracket available from your local hardware store. The bracket must fit one machine screw to mount to the rear of the hard drive, and it must also fit a screw capable of mounting the fan. I have been able to do it using the standard screws although you may need a matching nut & bolt for your fan depending on your bracket.

Before removing your drive and fan, make sure you get a test reading of the temperature reported by your hard drive, if your drive supports it.

Image: http://cheapbooks.name/pics/DSC00822.JPG

Mount the fan to the bracket as shown above. Make sure you mount it with the airflow arrow directed to the drive. Also ensure that the power cable for the fan is mounted at the back end of your setup. A second bracket can optionally be used on the other side of the fan, but keep in mind that in some cases you may have a slight warping effect on your fan if the holes do not line up accurately enough.

Image: http://cheapbooks.name/pics/DSC00820.JPG

After mounting the bracket to the fan, mount it to one of the rear screw holes on the drive. Mount it on the side facing your open case panel if you want to be able to replace the fan without removing the drive.

Image: http://cheapbooks.name/pics/DSC00818.JPG

Connect all the power cables and take a sampling of your temperature sensor on your hard drive, using tools such as SMART software. You should notice a dramatic change in temperature such that other cooling methods will no longer be necessary.

Copyright 2005 CheapBooks.com. All Rights Reserved.